Folding Saws










BIGBOY - Professional
- The SILKY BIGBOY is a well balanced, multi-purpose folding saw, designed for a greater reach. Available in Extra Large, Large, Medium, and Fine teeth, it travels well to wherever big work needs to be done, and the long 360mm blade provides faster cutting and accommodates large limbs and small trunks. This saw is great for forestry and arborist work as well as general pruning, and you'll love the non-slip rubberized cushioned comfort handle for complete control, and these saws are known for their superior quality finish. Ideal for cutting big jobs down to size.
The Bigboys are known for their superior quality finish, and are ideal for cutting big jobs down to size.
The Bigboy 2000 has the Extra Large teeth and a slightly curved blade, meaning an even better and faster result when cutting.- Extra Large - 6.5 teeth per 30mm (5.5 teeth per inch)
- Large - 7 teeth per 30mm (5.9 teeth per inch)
- Medium - 10 teeth per 30mm (8.5 teeth per inch)
- Fine - 13 teeth per 30mm (11 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance (apart from the Bigboy 2000)
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- Ultra-strong one piece construction with a non-slip molded rubber handle that really sticks in your hands
- Heavy duty, durable and specially designed pivoting sheath for the curved blade with a detachable belt holder included
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Bigboy handles, screw sets and blades available. Click the spare part to be taken to the relevant product option.
Bigboy replacement hand grips
Bigboy replacement screw sets
Bigboy replacement blades
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
Customer Reviews
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |






F180 - Professional
- The SILKY F-180 is a lightweight and strong folding saw suitable for multiple tasks. It's constructed of a fiberglass polypropylene molded handle with a rubber insert to insure comfortable and sure grip. Available in two different teeth configurations, the large teeth model cuts quickly through branches and firewood, and the fine teeth option is great for carpentry projects as well as general pruning.
The F-180 can fit in your pocket or glove compartment with ease, and it's an ideal cost-effective all-round folding saw that is always ready for trail blazing, trimming, pruning, or carpentry.
- Large Teeth - 7.5 teeth per 30mm (6.4 teeth per inch)
- Fine Teeth - 14 teeth per 30mm (11.9 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- Non-slip molded rubber handle that really sticks in your hands
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement F180 handles, screw sets, stopper covers, and blades available. Click the spare part tab to be taken to the relevant product option.
F180 replacement handles
F180 replacement screw sets
F180 replacement stopper covers
F180 replacement blades
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |










GOMBOY - Professional
- The SILKY GOMBOY is a multipurpose folding saw with a very smooth cutting action. This distinctive saw has earned a reputation as the finest folding saw on the market. Available in straight blade medium teeth and curve blade large teeth options, it's a best-seller among both gardeners and woodworkers. Aggressive teeth cut with amazing speed in green or dry wood, yet still cleanly enough for use as an installation trim saw or for a crosscut at the lumber yard. Securely textured rubber-padded handle and reliable spring-loaded blade lock make sawing safe and comfortable. It makes a superb gift and ideal for pruning as well as cutting dry, hard wood. Comes with a plastic carrying case for storage and carrying.
- Medium Straight - 10 teeth per 30mm (8.5 teeth per inch)
- Large Curve - 8 teeth per 30mm (6.8 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- Ultra-strong one piece construction with a non-slip molded rubber handle that really sticks in your hands
- Heavy duty, durable and specially designed pivoting sheath for the curved blade with a detachable belt holder included
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Gomboy handles, screw sets, cases and blades available. Click the spare part to be taken to the relevant product option.
Gomboy replacement handles
Gomboy replacement screw sets
Gomboy replacement cases
Gomboy replacement blades
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |








KATANABOY - Professional
- The SILKY KATANABOY is a two-handed, professional, heavy-duty folding saw available in a 500mm, 650mm or 1000mm blade - and it can easily compete with a chainsaw! Compared with the Katana, the legendary Japanese samurai sword, it is the largest folding saw on the market today. The long, well-balanced, taper-ground blade with an impulse-hardened, non-set tooth design provides extended working reach, faster cutting and handles large limbs and trunks with no effort. The non-slip, two-handed, rubberized cushioned handle provides a sure and comfortable grip even in the most difficult operating conditions. Suitable for serious tasks like cutting large timber and tree trunks. Exceptional design, strength, balance and superior finish quality. Comes with a sturdy nylon shoulder bag with Velcro fastening and a pocket for replacement blades.
*The Katanaboy 1000mm saw has progressive teeth (2.5 - 5 teeth per 30mm), which provide an easier, smoother start to the cutting stroke followed by a high speed, super productive finish.
- 500mm - 5 teeth per 30mm (4.2 teeth per inch)
- 650mm - 4 teeth per 30mm (3.4 teeth per inch)
- 1000mm - 2.5 - 5 teeth per 30mm (2.1 - 4.2 teeth per inch)
- Low effort triple edge, non-set tooth design
- Sharpenable
- Hard chrome plated, taper ground blade
- Ultra-strong one piece construction with a non-slip molded rubber handle that really sticks in your hands
- Heavy duty, durable and specially designed pivoting sheath for the curved blade with a detachable belt holder included
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Katanaboy handles, screw sets, carry bags and blades available. Click the spare part tab tom be taken to the relevant product option.
Katanaboy replacement handles
Katanaboy replacement screw sets
Katanaboy replacement blades
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |












POCKETBOY - Professional
- The SILKY POCKETBOY is a compact lightweight folding saw with an extraordinary cutting capacity that will take up very little pocket or backpack. Well known as the "Little Giant" by gardeners, hikers and campers, this slick saw features rust-resistant, hard chrome-plated, taper-ground blades with an impulse-hardened non-set tooth design for greater cutting efficiency. The precision ground, razor sharp teeth provide fast, clean and smooth cutting, and the blades locks securely into one of two open positions, in line with the handle and flush cutting. The blade resists the effects of tree resin and easily wipes clean. The rubber handle provides a sure, comfortable grip in the most difficult of conditions. Plastic flip-lock carrying case with belt clip included. An ideal saw for your glove box or to carry on hikes. Available in either 130mm or 170mm blade length and in Medium, Large, Large Curve, Fine and Extra Fine teeth options.
- Medium Teeth - 10 teeth per 30mm (8.5 teeth per inch)
- Large Teeth - 8 teeth per 30mm (6.8 teeth per inch)
- Large Teeth Curve - 8 teeth per 30mm (6.8 teeth per inch)
- Fine Teeth - 20 teeth per 30mm (16.9 teeth per inch)
- Extra Fine Teeth - 26 teeth per 30mm (22 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- Non-slip molded rubber handle that really sticks in your hands
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Pocketboy handles, screw sets, carry cases, and blades available. Click the spare part tab to be taken to the relevant product option.
Pocketboy replacement handles
Pocketboy replacement screw sets
Pocketboy replacement carry cases
Pocketboy replacement blades
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
Customer Reviews
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |






SUPER ACCEL - Professional
- The SILKY SUPER ACCEL is a lightweight, razor-tooth 210mm folding saw available in either large or fine teeth, and specially designed for aggressive cutting needs. The blade easily locks into two different angle positions for easy cutting, with the first position used for most cutting jobs. The rubber, pistol grip handle is easy to grasp especially on the pull-stroke when greater cutting force is needed, and on occasion the second flush cutting position proves invaluable in confined or unusual situations. The razor sharp teeth have four cutting angles along the length of the blade for fast, clean cuts, and the aluminium handle features a comfortable textured-rubber grip. Rated as one of the finest crafted folding hand saws available, the Super Accel has consistently been a popular choice of arborists and gardeners worldwide.
- Large Teeth - 7.5 teeth per 30mm (6.4 teeth per inch)
- Fine Teeth - 14 teeth per 30mm (11.9 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- Non-slip molded rubber handle that really sticks in your hands
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Super Accel handles, screw sets and blades available. Click the spare part tab to be taken to the relevant product option.
Super Accel replacement handles
Super Accel replacement screw sets
Super Accel replacement blades
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |






ULTRA ACCEL - Professional
-
The SILKY ULTRA ACCEL is built with a sturdy yet lightweight aluminum chassis, and with either a 240mm straight or curved blade it features an easy-grip rubberized handle to make it easy on your hands. The legendary cutting ability of Silky and the engineered smoothness that is synonymous with the name are all included - as you would expect.
- Large Teeth - 7.5 teeth per 30mm (6.4 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- Non-slip molded rubber handle that really sticks in your hands
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Ultra Accel handles, screw sets, and blades available. Click the spare part tab to be taken to the relevant product option.
Ultra Accel replacement handles
Ultra Accel replacement screw sets
Ultra Accel replacement blades
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
Customer Reviews
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |

ULTRA ACCEL TAIKO - Professional
-
The SILKY ULTRA ACCEL TAIKO is built with a sturdy yet lightweight aluminum chassis, and with a 240mm TAIKO blade, features an easy-grip rubberized handle to make it easy on your hands. The legendary cutting ability of Silky and the engineered smoothness that is synonymous with the name are all included - as you would expect.
The TAIKO convex blade is ideal for wood working and the slightly curved handle allows the hand to clear the workbench while cutting on flat surfaces.
- 10 teeth per 30mm (8.5 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- Non-slip molded rubber handle that really sticks in your hands
- Exceptional strength and balance
- Superior finish quality
- Limited 12 month manufacturers warranty
- There are full replacement Ultra Accel handles, screw sets, and blades available. Click the spare part tab to be taken to the relevant product option.
Ultra Accel replacement handles
Ultra Accel replacement screw sets
Ultra Accel replacement blades
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |