Woodworking Saws

HIBIKI - Professional
- The SILKY HIBIKI 210mm RYOGA saw is designed for Rip-cut and Cross-cut. It gives the user ultimate quality coupled with terrific features, and the taper-ground chrome-plated blade allows a fluid, straight cut as the teeth are actually wider than the mirror polished blade. The Hibiki also comes with a grey plastic case for storage and carrying on the belt.
- 22 + 10 teeth per 30mm (18.6 + 8.5 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- Ultra-strong one piece construction with a non-slip molded rubber handle that really sticks in your hands
- Heavy duty, durable and specially designed pivoting sheath for the curved blade with a detachable belt holder included
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Hibiki handles, screw sets, sheaths and blades available. Click the spare part tab to be taken to the relevant product option.
Hibiki replacement handles
Hibiki replacement screw sets
Hibiki replacement sheaths
Hibiki replacement blades
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |










TAKERUBOY - Professional
-
The SILKY TAKERUBOY is a buttlerfly handle carpentry saw with a ryoba blade and an innovative, rubberized handle. The wide blade, which helps make precise and straight cuts, is equipped with cross-cutting teeth and rip-cutting teeth on opposite edges. Both types of teeth are non-set to ensure a smooth finish and the blade is concave-ground to give less friction when cutting.
The Takeruboy is available in 2 lengths (240mm and 270mm) and 2 types of teeth configuration (18 teeth per 30mm and 24 teeth per 30mm).
- Fine Teeth Saw - 18 teeth per 30mm (15.2 teeth per inch)
- Extra Fine Teeth Saw - 24 teeth per 30mm (20.3 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- Non-slip molded rubber handle that really sticks in your hands
- Exceptional strength and balance
- Superior finish quality
- Limited 12 month manufacturers fault warranty
- There are full replacement Takerboy blades available. Click the spare part tab to be taken to the relevant product option.
Takeuboy replacement blades
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
Customer Reviews
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |

F180 - Fine Teeth Professional
-
DESCRIPTION
The SILKY F-180 FINE TEETH saw is a lightweight and strong folding saw suitable for multiple tasks. It's constructed of a fiberglass polypropylene molded handle with a rubber insert to insure comfortable and sure grip. The F-180 can fit in your pocket or glove compartment with ease, and it's an ideal cost-effective all-round folding saw that is always ready for trail blazing, trimming, pruning, or carpentry. The fine tooth option is great for carpentry projects as well as general pruning.
-
TECHNICAL SPECS
- Fine Teeth - 14 teeth per 30mm (11.9 teeth per inch)
- Non-set tooth design - taper ground blade designed to reduce resistance giving smoother, easier and faster cutting performance
- Mirai-Me finish - 4 cutting angles along the blade length
- Impulse hardened teeth - heated instantly and hardened, designed to stay sharper three times longer than non-hardened teeth
- Hard chrome plated blade producing high durable surface and resistance to rust and the effects of resin
- Specially designed GOM rubber handle which reduces vibration and offers superior grip
- Exceptional strength and balance
- Superior quality finish
- Made in Japan
- Limited 12 month manufacturers warranty
- For more information on Silky Saw technology and teeth configurations - click here
-
REPLACEMENT PARTS
There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.
F180 replacement handles
F180 replacement screw sets
F180 replacement stopper covers
F180 replacement blades
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |

SUPER ACCEL - Fine Teeth Professional
- DESCRIPTION
The SILKY SUPER ACCEL FINE TEETH saw is a lightweight, razor-tooth 210mm folding saw, especially designed for carpentry projects as well as general pruning. The blade easily locks into two different angle positions for easy cutting, with the first position used for most cutting jobs. The rubber, pistol grip handle is easy to grasp, particularly on the pull-stroke when greater cutting force is needed. And on occasion the second flush cutting position proves invaluable in confined or unusual situations. Rated as one of the finest crafted folding hand saws available, the Super Accel has consistently been a popular choice of arborists and gardeners worldwide. -
TECHNICAL SPECS
- Fine Teeth - 14 teeth per 30mm (11.9 teeth per inch)
- Non-set tooth design - taper ground blade designed to reduce resistance giving smoother, easier and faster cutting performance
- Mirai-Me finish - 4 cutting angles along the blade length
- Impulse hardened teeth - heated instantly and hardened, designed to stay sharper three times longer than non-hardened teeth
- Hard chrome plated blade producing high durable surface and resistance to rust and the effects of resin
- Specially designed GOM rubber handle which reduces vibration and offers superior grip
- Exceptional strength and balance
- Superior quality finish
- Made in Japan
- Limited 12 month manufacturers warranty
- For more information on Silky Saw technology and teeth configurations - click here
-
REPLACEMENT PARTS
There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.
Super Accel replacement handles
Super Accel replacement screw sets
Super Accel replacement blades
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |

POCKETBOY - Fine Teeth Professional
-
DESCRIPTION
The SILKY POCKETBOY FINE TEETH saw is a compact lightweight folding saw with an extraordinary cutting capacity that will take up very little pocket or backpack, and designed for carpentry projects as well as general pruning. Well known as the "Little Giant" by gardeners, hikers and campers, this slick saw features rust-resistant, hard chrome-plated, taper-ground blades with an impulse-hardened non-set tooth design for greater cutting efficiency. The precision ground, razor sharp teeth provide fast, clean and smooth cutting, and the blades locks securely into one of two open positions, in line with the handle and flush cutting. The blade resists the effects of tree resin and easily wipes clean. The rubber handle provides a sure, comfortable grip in the most difficult of conditions. An ideal saw for your glove box or to carry on hikes.
-
TECHNICAL SPECS
- Fine Teeth - 20 teeth per 30mm (16.9 teeth per inch)
- Non-set tooth design - taper ground blade designed to reduce resistance, giving smoother, easier and faster cutting performance
- Mirai-Me finish - 4 cutting angles along the blade length
- Impulse hardened teeth - heated instantly and hardened, designed to stay sharper three times longer than non-hardened teeth
- Hard chrome plated blade producing a high durable surface and resistance to rust and the effects of resin
- Non-slip molded rubber handle that really sticks in your hands
- Exceptional strength and balance
- Superior quality finish
- Made in Japan
- Limited 12 month manufacturers warranty
- For more information on Silky Saw technology and teeth configurations - click here
- There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.
Pocketboy replacement handles
Pocketboy replacement screw sets
Pocketboy replacement carry cases
Pocketboy replacement blades
Customer Reviews
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |

POCKETBOY - Extra Fine Teeth Professional
-
DESCRIPTION
The SILKY POCKETBOY EXTRA FINE TEETH saw is a compact lightweight folding saw with an extraordinary cutting capacity that will take up very little pocket or backpack, and is designed for carpentry and woodworking projects. Well known as the "Little Giant" by gardeners, hikers and campers, this slick saw features rust-resistant, hard chrome-plated, taper-ground blades with an impulse-hardened non-set tooth design for greater cutting efficiency. The precision ground, razor sharp teeth provide fast, clean and smooth cutting, and the blades locks securely into one of two open positions, in line with the handle and flush cutting. The blade resists the effects of tree resin and easily wipes clean. The rubber handle provides a sure, comfortable grip in the most difficult of conditions. An ideal saw for your glove box or to carry on hikes.
-
TECHNICAL SPECS
- Extra Fine Teeth - 26 teeth per 30mm (22 teeth per inch)
- Non-set tooth design - taper ground blade designed to reduce resistance, giving smoother, easier and faster cutting performance
- Impulse hardened teeth - heated instantly and hardened, designed to stay sharper three times longer than non-hardened teeth
- Hard chrome plated blade producing a high durable surface and resistance to rust and the effects of resin
- Non-slip molded rubber handle that really sticks in your hands
- Exceptional strength and balance
- Superior quality finish
- Made in Japan
- Limited 12 month manufacturers warranty
- For more information on Silky Saw technology and teeth configurations - click here
- There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.
Pocketboy replacement handles
Pocketboy replacement screw sets
Pocketboy replacement carry cases
Pocketboy replacement blades
Customer Reviews
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |

BIGBOY - Fine Teeth Professional
-
DESCRIPTION
The SILKY BIGBOY FINE TEETH saw is a well balanced, multi-purpose folding saw, designed for a greater reach. Available in Fine, Medium, Large, and Extra Large, it travels well to wherever big work needs to be done, and the long 360mm blade provides faster cutting and accommodates large limbs and small trunks. This saw is great for carpentry and woodworking projects as well as general pruning, and you'll love the non-slip rubberized cushioned comfort handle for complete control, and these saws are known for their superior quality finish. The Bigboys are known for their superior quality finish, and are ideal for cutting big jobs down to size.
-
TECHNICAL SPECS
- Fine Teeth - 13 teeth per 30mm (11 teeth per inch)
- Non-set tooth design - taper ground blade designed to reduce resistance giving smoother, easier and faster cutting performance
- Mirai-Me finish - 4 cutting angles along the blade length
- Impulse hardened teeth - heated instantly and hardened, designed to stay sharper three times longer than non-hardened teeth
- Hard chrome plated blade producing high durable surface and resistance to rust and the effects of resin
- Specially designed GOM rubber handle which reduces vibration and offers superior grip
- Exceptional strength and balance
- Superior quality finish
- Made in Japan
- Limited 12 month manufacturers warranty
- For more information on Silky Saw technology and teeth configurations - click here
-
REPLACEMENT PARTS
There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.
Bigboy replacement hand grips
Bigboy replacement screw sets
Bigboy replacement blades
Customer Reviews
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |

ULTRA ACCEL TAIKO - Professional
- DESCRIPTION
The SILKY ULTRA ACCEL TAIKO saw is built with a sturdy yet lightweight aluminum chassis, and with a 240mm TAIKO blade, features an easy-grip rubberized handle to make it easy on your hands. The TAIKO convex blade is ideal for wood working and the slightly curved handle allows the hand to clear the workbench while cutting on flat surfaces. -
TECHNICAL SPECS
- Medium Teeth - 10 teeth per 30mm (8.5 teeth per inch)
- Non-set tooth design - taper ground blade designed to reduce resistance giving smoother, easier and faster cutting performance
- Mirai-Me finish - 4 cutting angles along the blade length
- Impulse hardened teeth - heated instantly and hardened, designed to stay sharper three times longer than non-hardened teeth
- Hard chrome plated blade producing high durable surface and resistance to rust and the effects of resin
- Specially designed non-slip rubberized handle offering superior grip
- Exceptional strength and balance
- Superior quality finish
- Made in Japan
- Limited 12 month manufacturers warranty
- For more information on Silky Saw technology and teeth configurations - click here
-
REPLACEMENT PARTS
There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.
Ultra Accel replacement handles
Ultra Accel replacement screw sets
Ultra Accel replacement blades
Customer Reviews
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |

MINI MINI WOOD - Professional
-
The SILKY MINI MINI WOOD saw is fantastic for cutting dry or hard wood. Not only do hobbyists of all kinds love this saw, but it is also wonderful for cutting small bamboo and drift wood, etc.
The Mini Mini Wood cuts on both the pull and the push stroke.
- Length 150mm
- Hard chrome plated blade
- Non-slip molded rubber handle that really sticks in your hands
- Exceptional strength and balance
- Superior finish quality
- Limited 12 month manufacturers fault warranty
- There are full replacement Mini Mini Wood blades available. Click the spare part tab to be taken to the relevant product option.
Mini Mini Wood replacement blades
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |

TABLE NOCO - Professional
-
The SILKY TABLE NOCO saw has a curved curved blade which allows you to comfortably cut on flat surfaces. The semi-circular sawing motion replaces the linear motion, and the slightly curved handle allows the hand to clear the workbench easily.
The relatively short blade and the position of the handle allows the user to access the more "hard to reach" spots.
- Length 180mm
- Hard chrome plated blade
- Non-slip molded rubber handle that really sticks in your hands
- Exceptional strength and balance
- Superior finish quality
- Limited 12 month manufacturers fault warranty
-
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |