Castellari

SECATEURS

$90.00

CASTELLARI S.R.L have been manufacturing high quality horticulture tools for over 30 years.

The CASTELLARI SECATEURS have an indentation in the blade that cuts down friction and thus increases penetration, while the striking forged aluminium counter-blade allows you vto perform clean cuts even after months of work. The whole effect and the stroke of the blade against the counter-blade considerably cuts down wrist kickback.

The ergonomic swept-back handles are designed to further reduce the impact of wrist kick that can be an issue for the commercial user. It has proved immensely popular in the vineyards and olive groves. The lightweight construction belies the powerful clean cutting action

We have two CASTELLARI SECATEURS available.

With a length of 21cm, a cutting capacity up to 25mm, and an approximate weight of only 220g, the ERGO secateurs are extremely light and easy to use.

With a length of 19cm, a cutting capacity up to 22mm, and an approximate weight of only 165g, the MINI secateurs are extremely light and easy to use.

Both secateurs are the lightest in their categories, and this is achieved thanks to the weight reduction that is only possible with forged products. These secateurs are suitable for all types of cutting: viticulture, fruit harvesting, olive harvesting and gardening.
- Made in Italy
- Limited 12 month manufacturers fault warranty

SILKY SAW TECHNOLOGY...

SILKY saws work on the pull stroke, minimising effort and providing a smooth clean cut, maximising tree health. They can rip-cut, cross-cut and slant-cut. The hard chrome plating produces an exceedingly hard, durable surface, the replaceable blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.

The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.

	Mirai-Me Smooth Cutting The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut.
	Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance.
	Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth.
	Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet.

SILKY TEETH CONFIGURATIONS...

The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.

	Extra Large Teeth Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
	Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
	Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
	Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
	Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.

FLAX CUTTER

$30.00

DESCRIPTION

The MARUYOSHI FLAX CUTTER is a great hand tool for cutting all fibrous plants, like flax and cabbage tree leaves. It is not a wood saw, and the serrated blade only works when you are pulling the blade back towards yourself.
- Made from high carbon steel
- Approx weight 100g
- The blade is tempered to give long lasting durability
- The tool has a special back bar designed to add even more strength to the blade
- Made in Japan
- Limited 12 month manufacturers fault warranty

SILKY SAW TECHNOLOGY...

	Mirai-Me Smooth Cutting The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut.
	Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance.
	Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth.
	Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet.

SILKY TEETH CONFIGURATIONS...

	Extra Large Teeth Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
	Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
	Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
	Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
	Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.

Maruyoshi

GRUBBER - Short Handle (Right Hand)

$35.00

DESCRIPTION

The MARUYOSHI GARDEN GRUBBER (or Hoe) is a strong short handled tool that's great for ground work, and available in both Right and Left Hand options.
- Made from high carbon steel
- Approx weight 200g
- The blades are tempered to give long lasting durability
- The tools have a special back bar designed to add even more strength to the blade
- Made in Japan
- Limited 12 month manufacturers fault warranty

Customer Reviews

Based on 1 review Write a review

SILKY SAW TECHNOLOGY...

	Mirai-Me Smooth Cutting The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut.
	Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance.
	Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth.
	Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet.

SILKY TEETH CONFIGURATIONS...

	Extra Large Teeth Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
	Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
	Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
	Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
	Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.

Maruyoshi

GRUBBER - Long Handle

$95.00

DESCRIPTION

The MARUYOSHI LONG HANDLE GRUBBER is a great hand tool for ground work around the garden without having to bend down.
- Made from high carbon steel
- Approx weight 600g
- Length 900mm
- The blade is tempered to give long lasting durability
- Made in Japan
- Limited 12 month manufacturers fault warranty

SILKY SAW TECHNOLOGY...

	Mirai-Me Smooth Cutting The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut.
	Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance.
	Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth.
	Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet.

SILKY TEETH CONFIGURATIONS...

	Extra Large Teeth Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
	Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
	Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
	Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
	Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.

Maruyoshi

HORI HORI - Weeder

$63.00

DESCRIPTION

The MARUYOSHI HORI HORI WEEDER (or soil knife) is a great tool for the garden and has a heavy serrated multi-purpose steel blade for gardening jobs such as digging or cutting, all round weeding, bulb planting, and general subterranean rumaging.

Available in either 170mm large or 120mm mini sizes.
- Made from high carbon steel
- 170mm Large approx weight 300g
- 120mm Mini approx weight 100g
- Length 900mm
- The blades are tempered to give long lasting durability
- Made in Japan
- Limited 12 month manufacturers fault warranty

SILKY SAW TECHNOLOGY...

	Mirai-Me Smooth Cutting The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut.
	Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance.
	Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth.
	Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet.

SILKY TEETH CONFIGURATIONS...

	Extra Large Teeth Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
	Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
	Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
	Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
	Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.

Next: SECATEURS

Back to Garden Tools

Next: SECATEURS