Silky

SINTUNG ADAPTOR (for Silky Hayate Pole Saw)

$25.00

DESCRIPTION

The SINTUNG CONNECTOR is designed to attach the SINTUNG LOPPER HEAD to the SILKY HAYATE POLE SAW RANGE.

Please note - the Sintung Lopper Head was originally designed to fit the Silky Hayauchi Pole Saw range only. The connector will now enable users to fit the lopper head to their Hayate Pole Saw range also.

* If you are purchasing the Sintung Lopper Head for your Hayate Extension Pole Saw, you will need to purchase the connector as well.
TECHNICAL SPECS
- Limited 12 month manufacturers warranty

POLE SAW - Zubat Professional

$249.00

DESCRIPTION

The SILKY ZUBAT POLE SAW is a lightweight professional grade aluminum pole saw that has an oval shaped cross-section and is aluminum in construction. There are 3 extension option lengths available - 2.65m, 3.3m and 3.85m, and the saw heads have the same 330mm curved blade as the Zubat hand saws. The base pole has a comfortable sponge rubber grip, the pole has a lever lock with spring loaded buttons at the end of each length, and the extension poles gives precise control to the dcirection of the saw blade (especially important for high cutting) and strength and rigidity to the pole, reducing bending to the minimum. Push buttons allow multiple length adjustments and safety clamps hold the extensions firmly in place. Very lightweight and easy to manoeuvre.

The Zubat pole saw series also has the uniqueness of upgrading to a Pole Saw Plus option, where you receive the extension pole saw as well as a standard hand saw handle and belt clip. This enables you to remove the blade of the saw from the pole in a few seconds and attach the handle and belt clip converting it to a normal hand saw. When purchasing these, simply select one of the (plus) options from the drop down menu above, depending on which length of pole you are after.

There is also an extension pole saw safety instruction sheet attached - just click on the photo above left to view. If you would prefer to download and/or print the instruction sheet - CLICK HERE
TECHNICAL SPECS
- 3 extension lengths available
- 2.65m 1-Ext 1200 - 1.75m collapsed/2.65m extended (with saw head) - 1.31m (without saw head)
- 3.30m 1-Ext 1500 - 2.0m collapsed/3.30m extended (with saw head) - 1.61m (without saw head)
- 3.85m 1-Ext 1800 - 2.35m collapsed/3.85m extended (with saw head) - 1.91m (without saw head)
- 2.65m Weight - 1,375g
- 3.3m Weight - 1,545g
- 3.85m Weight - 1,725g
- Blade Length - 330mm
- Large 7.5 teeth per 30mm (6.4 teeth per inch)
- Kerf (width of material that is removed by the cut) - 1.4mm
- Non-set tooth design - taper ground blade designed to reduce resistance giving a smoother, easier and faster cutting performance
- Mirai-Me finish - 4 cutting angles along the blade length
- Impulse hardened teeth - heated instantly and hardened, designed to stay sharper three times longer than non-hardened teeth
- Hard chrome plated blade producing a high durable surface and resistance to rust and the effects of resin
- Exceptional strength and balance
- Superior quality finish
- Made in Japan
- Limited 12 month manufacturers warranty
- For more information on Silky Saw technology and teeth configurations - click here
REPLACEMENT PARTS

There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.

Zubat spare parts
Zubat replacement blade

Customer Reviews

Based on 6 reviews Write a review

Silky

POLE SAW - Hayauchi Professional

$348.00

DESCRIPTION

The SILKY HAYAUCHI POLE SAW is a true professional heavy duty aluminum pole saw. This saw has rigid aluminum poles that quickly extend to the desired cutting length, available in 3 extension lengths - 3.7m, 4.9m, and 6.3m. The base pole has a comfortable rubber grip. The extension lock has spring loaded buttons at the end of each length and the blades not only sport extra large teeth, but also have a sharpened base and tip for scoring the branch, to avoid ripping damage to the branch collar. The upper sickle is used to cut vines; the lower one - to undercut bark allowing a clean cut without damaging the tree.

There are also now 2 blade lengths available - 390mm and the ALL NEW 480mm. *If you are interested in purchasing the 480mm blade length option - and if there are none showing in stock - please contact us directly for more information.

The aluminum alloy extension pole is oval shaped, giving precise control to the direction of the saw blade (especially important for high cutting) and also giving strength and rigidity to the pole, reducing bending to the minimum. Push buttons allow multiple length adjustments and safety clamps hold the extensions firmly in place. A rubber hand-grip ensures good hold and control. The blade is adjustable for lower or higher cutting.

Safety considerations necessitates that the user wear a hard hat and eye protection at all times. Since the saws can cut quite heavy branches, the user should take care to stay clear of any falling material. This is the finest telescoping pole saw available on the market today.

There is also an extension pole saw safety instruction sheet attached - just click on the photo above left to view. If you would prefer to download and/or print the instruction sheet - CLICK HERE
TECHNICAL SPECS
- 3 extension lengths available
- 3.7m 1-Ext - 2.28m collapsed/3.7m extended (with saw head) - 1.82m (without saw head)
- 4.9m 2-Ext - 2.35m collapsed/4.9m extended (with saw head) - 1.86m (without saw head)
- 6.3m 3-Ext - 2.44m collapsed/6.3m extended (with saw head) - 1.90m (without saw head)
- 3.7m Weight - 390mm 2,100g / 480mm 2,365g
- 4.9m Weight - 390mm 2,650g / 480mm 2,915g
- 6.3m Weight - 390mm 3,280g / 480mm 3,545g
- Blade Length - 390mm or 480mm
- Extra Large 6.5 teeth per 30mm (5.5 teeth per inch)
- Kerf (width of material that is removed by the cut) - 2.3mm
- 4-Retsume teeth configuration - cross-cut, rip-cut and slant-cut
- Sharpenable
- Electroless Nickel Plating coated blade producing a high durable surface and resistance to rust and the effects of resin
- Exceptional strength and balance
- Superior quality finish
- Made in Japan
- Limited 12 month manufacturers warranty
- For more information on Silky Saw technology and teeth configurations - click here
REPLACEMENT PARTS

There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.

Hayauchi spare parts
Hayauchi replacement blade

Customer Reviews

Based on 1 review Write a review

Silky

POLE SAW - Hayate Professional

$419.00

DESCRIPTION

The SILKY HAYATE POLE SAW is a super efficient, state-of-the-art Silky telescoping saw now available in 4 extension lengths of 3.8m, 5.0m, 6.1m and the ALL NEW 7.7m that offers many exciting advanced features including a stronger 420mm curved chrome-plated blade, thicker oval-profile poles, pole-end shock absorber and much more. The aggressive curved blade cuts efficiently with less effort, is harder than conventional blades, and maintains a superior wear resistant cutting edge. The taper ground profile reduces drag and directs more usable energy to the cutting edge. The ultra sharp non-set tooth design cuts quickly leaving a silky smooth surface. Also features an optional replaceable sickle blade for small branches. The Hayate is manufactured with high visibility colors and comes equipped with a new advanced design sheath with a built-in carrying handle. It is ideal for pruning large branches at higher position without ever climbing a ladder.

These tools should never be used in the vicinity of power or telephone lines. Safety considerations necessitates that the user wear a hard hat and eye protection at all times. Since the saws can cut quite heavy branches, the user should take care to stay clear of any falling material. This is the strongest, fastest, telescoping pole saw available on the market today.

There is also an extension pole saw safety instruction sheet attached - just click on the photo above left to view. If you would prefer to download and/or print the instruction sheet - CLICK HERE
TECHNICAL SPECS
- 4 extension lengths available
- 3.8m 1-Ext - 2.40m collapsed/3.8m extended (with saw head) - 1.90m (without saw head)
- 5.0m 2-Ext - 2.40m collapsed/5.0m extended (with saw head) - 1.90m (without saw head)
- 6.1m 3-Ext - 2.40m collapsed/6.1m extended (with saw head) - 1.90m (without saw head)
- 7.7m 3-Ext - 2.70m collapsed/7.7m extended (with saw head) - 2.25m (without saw head)
- 3.8m Weight - 2,470g
- 5.0m Weight - 3,170g
- 6.1m Weight - 3,930g
- 7.7m Weight - 4,550g
- Blade Length - 420mm
- Extra Large 6.5 teeth per 30mm (5.5 teeth per inch)
- Kerf (width of material that is removed by the cut) - 1.7mm
- Non-set tooth design - taper ground blade designed to reduce resistance giving a smoother, easier and faster cutting performance
- Mirai-Me finish - 4 cutting angles along the blade length
- Sharpenable
- Hard chrome plated blade producing a high durable surface and resistance to rust and the effects of resin
- Exceptional strength and balance
- Superior quality finish
- Made in Japan
- Limited 12 month manufacturers warranty
- For more information on Silky Saw technology and teeth configurations - click here
REPLACEMENT PARTS

There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.

Hayate spare parts
Hayate replacement blade

Customer Reviews

Based on 1 review Write a review

Silky

POLE SAW - Forester Professional

$310.00

DESCRIPTION

The SILKY FORESTER POLE SAW is a lightweight professional grade aluminum pole saw, available in two extension lengths - 3.0m and 4.5m. It has a thick and long 380mm length blade (for more rigidity and cutting performance). The pole has a lever lock with spring loaded buttons at the end of each length. These push buttons allow multiple length adjustments, and safety clamps hold the extensions firmly in place. Compared with the Zubat pole saw series, the Forester becomes shorter because of having one more extension - which is great for storage. It has also been designed in a Red colour, so it is easy to find in thick bush and forest.

There is also an extension pole saw safety instruction sheet attached - just click on the photo above left to view. If you would prefer to download and/or print the instruction sheet - CLICK HERE
TECHNICAL SPECS
- 2 extension lengths available
- 3.0m 2-Ext 3000 - 1.70m collapsed/3.0m extended (with saw head) - 1.19m (without saw head)
- 4.5m 2-Ext 4500 - 2.20m collapsed/4.5m extended (with saw head) - 1.69m (without saw head)
- 3.0m Weight - 1,790g
- 4.5m Weight - 2,270g
- Blade Length - 380mm
- Large 7.5 teeth per 30mm (6.4 teeth per inch)
- Kerf (width of material that is removed by the cut) - 1.7mm
- Non-set tooth design - taper ground blade designed to reduce resistance giving a smoother, easier and faster cutting performance
- Mirai-Me finish - 4 cutting angles along the blade length
- Impulse hardened teeth - heated instantly and hardened, designed to stay sharper three times longer than non-hardened teeth
- Hard chrome plated blade producing a high durable surface and resistance to rust and the effects of resin
- Exceptional strength and balance
- Superior quality finish
- Made in Japan
- Limited 12 month manufacturers warranty
- For more information on Silky Saw technology and teeth configurations - click here
There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.

Forester spare parts
Forester replacement blade

Silky

POLE SAW - Longboy Professional

$399.00

DESCRIPTION

The SILKY LONGBOY POLE SAW is the new technological breakthrough in professional pole saw design from Silky! It is super lightweight (only 1.95kg), extremely compact (length of only 1.4m when poles are stored), and easily fits in the trunk of any car. Equipped with an aggressive, curved, chrome-plated 360mm blade with non-set, taper-ground, impulse-hardened 6 tpi teeth configuration, the advanced designed special SKS-5 high-tech alloy steel blade provides significantly improved cutting efficiency and maintains superior wear resistant cutting edge. And the additional oval-profile pole features include new ergonomic non-slip over grip design and unique pole end shock absorber. The Longboy comes with a plastic high visibility sheath that securely locks to the lower pole when blade is folded.

There is also an extension pole saw safety instruction sheet attached - just click on the photo above left to view. If you would prefer to download and/or print the instruction sheet - CLICK HERE
TECHNICAL SPECS
- 1 length available - 3.6m
- Weight - 2,115g
- Blade Length - 360mm
- Large 7.5 teeth per 30mm (6.4 teeth per inch)
- Kerf (width of material that is removed by the cut) - 1.7mm
- Non-set tooth design - taper ground blade designed to reduce resistance giving a smoother, easier and faster cutting performance
- Mirai-Me finish - 4 cutting angles along the blade length
- Impulse hardened teeth - heated instantly and hardened, designed to stay sharper three times longer than non-hardened teeth
- Hard chrome plated blade producing a high durable surface and resistance to rust and the effects of resin
- Exceptional strength and balance
- Superior quality finish
- Made in Japan
- Limited 12 month manufacturers warranty
- For more information on Silky Saw technology and teeth configurations - click here
REPLACEMENT PARTS

There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.

Longboy spare parts
Longboy replacement blade

Next: HOOK FOX - Pole Saw Attachment

Back to Extension Pole Saws

Next: HOOK FOX - Pole Saw Attachment