Extension Pole Saws






POLE SAW - Forester Professional
-
The SILKY FORESTER POLE SAW is a lightweight professional grade aluminum pole saw, available in two extenstion lengths - 3.0m and 4.5m. It has a thick and long 380mm length blade (for more rigidity and cutting performance). The pole has a lever lock with spring loaded buttons at the end of each length. These push buttons allow multiple length adjustments, and safety clamps hold the extensions firmly in place. Compared with the Zubat pole saw series, the Forester becomes shorter because of having one more extension - which is great for storage. It has also been designed in a Red colour, so it is easy to find in thick bush and forest.
There is also an extension pole saw safety instruction sheet attached - just click on the photo to the left to view.
- 380mm length blade
- 7.5 teeth per 30mm (6.4 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- 2 Extensions available - 3m and 4.5m
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Forester poles, clamp sets, screw sets, springs, fixing pipes, sheaths and blades available. Click the spare part link below and view the exploded parts view to see which part you require.
Click here for the Forester Replacement Blade
For all other spare parts please click here: Forester Spare Parts
-
Silky uses a significant amount of advanced technology in the design of each blade - adjusting the blade size and teeth configuration for a variety of uses. See the charts below for the configuration of this particular saw.
There are different size teeth across the Silky range of saws, depending upon their intended use. Refer to the Silky Teeth Configuration Chart to help ensure your blade has the best configuration for you.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |






POLE SAW - Hayate Professional
- The SILKY HAYATE POLE SAW is a super efficient, state-of-the-art Silky telescoping saw now available in 4 extension lengths of 3.8m, 5.0m, 6.1m and the ALL NEW 7.7m that offers many exciting advanced features including a stronger 420mm curved chrome-plated blade, thicker oval-profile poles, pole-end shock absorber and much more.
The aggressive curved blade cuts efficiently with less effort, is harder than conventional blades, and maintains a superior wear resistant cutting edge. The taper ground profile reduces drag and directs more usable energy to the cutting edge. The ultra sharp non-set tooth design cuts quickly leaving a silky smooth surface. Also features an optional replaceable sickle blade for small branches.
The Hayate is manufactured with high visibility colors and comes equipped with a new advanced design sheath with a built-in carrying handle. It is ideal for pruning large branches at higher position without ever climbing a ladder.
These tools should never be used in the vicinity of power or telephone lines. Safety considerations necessitates that the user wear a hard hat and eye protection at all times. Since the saws can cut quite heavy branches, the user should take care to stay clear of any falling material. This is the strongest, fastest, telescoping pole saw available on the market today.
There is also an extension pole saw safety instruction sheet attached - just click on the photo to the left to view.- 420mm length blade
- 6.5 teeth per 30mm (5.5 teeth per inch)
- Mirai-Me smooth cutting performance
- Sharpenable
- Hard chrome plated, taper ground blade
- 3 Extensions available - 3.8m, 5m and 6.1m
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Hayate poles, clamp sets, screw sets, springs, fixing pipes, sheaths and blades available. Click the spare part links below and view the exploded parts view to see which part you require.
Click here for the Hayate Replacement Blade
For all other spare parts please click here: Hayate Spare Parts
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |




POLE SAW - Hayauchi Professional
-
The SILKY HAYAUCHI POLE SAW is a true professional heavy duty aluminum pole saw. This saw has rigid aluminum poles that quickly extend to the desired cutting length, available in 3 extension lengths - 3.7m, 4.9m, and 6.3m. The base pole has a comfortable rubber grip. The extension lock has spring loaded buttons at the end of each length and the blades not only sport extra large teeth, but also have a sharpened base and tip for scoring the branch, to avoid ripping damage to the branch collar. The upper sickle is used to cut vines; the lower one - to undercut bark allowing a clean cut without damaging the tree.
There are now 2 blade lengths available - 390mm and the ALL NEW 480mm.
The aluminum alloy extension pole is oval shaped, giving precise control to the direction of the saw blade (especially important for high cutting) and also giving strength and rigidity to the pole, reducing bending to the minimum. Push buttons allow multiple length adjustments and safety clamps hold the extensions firmly in place. A rubber hand-grip ensures good hold and control. The blade is adjustable for lower or higher cutting.
Safety considerations necessitates that the user wear a hard hat and eye protection at all times. Since the saws can cut quite heavy branches, the user should take care to stay clear of any falling material. This is the finest telescoping pole saw available on the market today.
There is an extension pole saw safety instruction sheet attached - just click on the photo to the left to view.
- 390mm or 480mm length blade
- 6.5 teeth per 30mm (5.5 teeth per inch)
- 4-Retsume (cross-cut, rip-cut and slant-cut) smooth cutting performance
- Sharpenable
- Electroless Nickel Plated blade
- 3 Extensions available - 3.7m, 4.9m and 6.3m
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Hayauchi poles, clamp sets, screw sets, springs, fixing pipes, sheaths and blades available. Click the spare part links below and view the exploded parts view to see which part you require.
Click here for the Hayauchi Replacement Blade
For all other spare parts please click here: Hayauchi Spare Parts
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |




POLE SAW - Longboy Professional
- The SILKY LONGBOY POLE SAW is the new technological breakthrough in professional pole saw design from Silky! It is super lightweight (only 1.95kg), extremely compact (length of only 1.4m when poles are stored), and easily fits in the trunk of any car. Equipped with an aggressive, curved, chrome-plated 360mm blade with non-set, taper-ground, impulse-hardened 6 tpi teeth configuration, the advanced designed special SKS-5 high-tech alloy steel blade provides significantly improved cutting efficiency and maintains superior wear resistant cutting edge. And the additional oval-profile pole features include new ergonomic non-slip over grip design and unique pole end shock absorber.
The Longboy comes with a plastic high visibility sheath that securely locks to the lower pole when blade is folded.
There is also an extension pole saw safety instruction sheet attached - just click on the photo to the left to view.
- 360mm length blade
- 7.5 teeth per 30mm (6.4 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- Extends to 3.6m
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Longboy poles, clamp sets, screw sets, springs, fixing pipes, sheaths and blades available. Click the spare part link below and view the exploded parts view to see which part you require.
Click here for the Longboy Replacement Blade
For all other spare parts please click here: Longboy Spare Parts
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |




POLE SAW - Zubat Professional
-
The SILKY ZUBAT POLE SAW is a lightweight professional grade aluminum pole saw that has an oval shaped cross-section and is aluminum in construction.
There are 3 extension option lengths available - 2.65m, 3.3m and 3.85m, and the saw heads have the same 330mm curved blade as the Zubat hand saws. The base pole has a comfortable sponge rubber grip, the pole has a lever lock with spring loaded buttons at the end of each length, and the extension poles gives precise control to the dcirection of the saw blade (especially important for high cutting) and strength and rigidity to the pole, reducing bending to the minimum. Push buttons allow multiple length adjustments and safety clamps hold the extensions firmly in place. Very lightweight and easy to manoeuvre.
The Zubat pole saw series also has the uniqueness of upgrading to a Pole Saw Plus option, where you receive the extension pole saw as well as a standard hand saw handle and belt clip. This enables you to remove the blade of the saw from the pole in a few seconds and attach the handle and belt clip converting it to a normal hand saw. When purchasing these, simply select either (plus) options from the drop down menu above, depending on which length of pole you are after.
There is also an extension pole saw safety instruction sheet attached - just click on the photo to the left to view.
- 330mm length blade
- 7.5 teeth per 30mm (6.4 teeth per inch)
- Low effort triple edge, non-set tooth design
- Mirai-Me smooth cutting performance
- Impulse hardened teeth
- Hard chrome plated, taper ground blade
- 3 Extensions available - 2.65m, 3.3m and 3.85m
- Exceptional strength and balance
- Superior finish quality
- Made in Japan
- Limited 12 month manufacturers warranty
- There are full replacement Zubat poles, clamp sets, screw sets, springs, fixing pipes, sheaths and blades available. Click the spare part link below and view the exploded parts view to see which part you require.
Click here for the Zubat Replacement Blade
For all other spare parts please click here: Zubat Spare Parts
-
ABOUT TEETH SIZE
The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
Large Teeth
A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
Medium Teeth
Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
Fine Teeth
These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
Extra Fine Teeth
These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.
Customer Reviews
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |








LOPPER HEAD - Sintung (for Silky Hayauchi Pole Saw)
- The SINTUNG LOPPER HEAD is a ratchet-operated lopper head accessory designed to fit the SILKY HAYAUCHI POLE SAW RANGE.
The head replaces the pole saw blade in just a couple of minutes and offers precise and easy pruning of branches up to 2 inches (50mm) in diameter. It features a high carbon steel cutting blade, which has been fully heat-treated and is Teflon-S coated to ensure smooth cutting. The lopper uses a double pulley system and a four-position ratchet mechanism that allows lopping of thick branches with minimal effort and is supplied in a tough, protective draw-string pouch.
-
- Approximate weight 1300g
- Cutting capacity up to 50mm
- Hot dropped forged blade and lever made from high quality steel
- Made in Taiwan specifically for Silky Saws Japan
- Limited 12 month manufacturers fault warranty
-
-
SILKY SAW TECHNOLOGY...
The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.
Mirai-Me Smooth Cutting
The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut. |
|
Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance. |
|
Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth. |
|
Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file. |
|
Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily. |
|
Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet. |
SILKY TEETH CONFIGURATIONS...
Extra Large Teeth
Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut. |
|
Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved. |
|
Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws. |
|
Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish. |
|
Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected. |