Tying and Fastening Systems for Horticulture and Viticulture

Sort

For over 60 years Agrifast by Simes have specialised is a range of horticultural and viticultural tying and fastening systems engineered to quickly and efficiently train and fasten in the vineyard, orchard and nursery.

Sold Out

TAPE TOOL FASTENING SYSTEM - Tape

Agrifast by Simes

$13.00

Sold Out

TAPE TOOL FASTENING SYSTEM - Staples

Agrifast by Simes

$7.00

IRRIGATION FASTENING SYSTEMS - Staples

Agrifast by Simes

from $38.00

TOMATO TRELLISING SYSTEM - Staples

Agrifast by Simes

$48.30

Sold Out

TOMATO TRELLISING SYSTEM

Agrifast by Simes

$3,565.00

IRRIGATION FASTENING SYSTEMS

Agrifast by Simes

from $100.00

TAPE TOOL FASTENING SYSTEM

Agrifast by Simes

$125.00

Agrifast by Simes

IRRIGATION FASTENING SYSTEMS - Staples

$40.00

DESCRIPTION

The AGRIFAST "E" STAPLES are required for use with the Model 140 and 150 Agrifast by Simes Irrigation Fastening Tools. These staples allow expansion and contraction of the pipe without affecting the fastening strength and without slipping. It is recommended that the placement of these staples is at half metre intervals along the pipes length.
TECHNICAL SPECS
- E45 Staples
- Designed for use with the Model 140 Tool
- To suit 16mm - 20mm outside diameter hose pipe
- Staple size 45mm x 22mm x 2mm
- 650 staples per packet
- E50 Staples
- Designed for use with the Model 150 Tool
- To suit 21mm - 24mm outside diameter hose pipe
- Staple size 50mm x 31mm x 2mm
- 500 staples per packet
- Limited 12 month manufacturers warranty

SILKY SAW TECHNOLOGY...

SILKY saws work on the pull stroke, minimising effort and providing a smooth clean cut, maximising tree health. They can rip-cut, cross-cut and slant-cut. The hard chrome plating produces an exceedingly hard, durable surface, the replaceable blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.

The Icons below describe the various features that make SIlky Saws so unique and high performing. Please view individual saw descriptions to determine which features relates to that specific model.

	Mirai-Me Smooth Cutting The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut.
	Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance.
	Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth.
	Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet.

SILKY TEETH CONFIGURATIONS...

The guide below refers to the numbers of teeth per 30mm on the blade. Each Silky blade is defined as having "Extra Large Teeth" to "Extra Fine Teeth" and the icons below are designed to help you identify the teeth configuration of every saw in the Silky range.

	Extra Large Teeth Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
	Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
	Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
	Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
	Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.

Agrifast by Simes

TOMATO TRELLISING SYSTEM - Staples

$48.30

DESCRIPTION

The V46 Galvanised Metallic staples are designed for the Agrifast by Simes TOMATO TRELLISING SYSTEM.
TECHNICAL SPECS
- Biodegradable staples
- Healthier on plants
- Quantity per box - 6000
- Maximum clip closure - 22mm
- Clip diameter - 1.39mm
- Limited 12 month manufacturers warranty

SILKY SAW TECHNOLOGY...

	Mirai-Me Smooth Cutting The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut.
	Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance.
	Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth.
	Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet.

SILKY TEETH CONFIGURATIONS...

	Extra Large Teeth Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
	Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
	Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
	Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
	Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.

Agrifast by Simes

IRRIGATION FASTENING SYSTEMS

$288.00

DESCRIPTION

AGRIFAST BY SIMES have irrigation fasteners that are easy to use, hard wearing, and serviceable. They are used to apply the specially designed "E" staples when fastening poly pipe or irrigation lines to wire in the vineyard or orchard. We have 2 irrigation fastener tools available - the MODEL 140 and MODEL 150.

PLEASE NOTE: Staples are also required for these tools (detailed below and sold separately). The Agrifast "E" staples allow expansion and contraction of the pipe without affecting the fastening strength and without slipping. It is recommended that the placement of these staples is at half metre intervals along the pipes length.
TECHNICAL SPECS
- Model 140 Tool
- Designed to apply the E45 staples when fastening poly pipe or irrigation lines of varying diameters to wire in the vineyard or orchard
- Interchangeable Simes IR Magazine E45 required (sold separately)
- Limited 12 month manufacturers warranty
- Model 150 Tool
- Designed to apply the E50 staples when fastening poly pipe or irrigation lines of varying diameters to wire in the vineyard or orchard
- Comes complete with a fixed magazine
- Limited 12 month manufacturers warranty
REPLACEMENT PARTS

There are full replacement parts available. Please contact us on sales@silkystore.co.nz for more information.

SILKY SAW TECHNOLOGY...

	Mirai-Me Smooth Cutting The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut.
	Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance.
	Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth.
	Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet.

SILKY TEETH CONFIGURATIONS...

	Extra Large Teeth Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
	Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
	Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
	Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
	Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.

Agrifast by Simes

TAPE TOOL FASTENING SYSTEM

$125.00

DESCRIPTION

The Agrifast by Simes MODEL 145 TAPE TOOL is a heavy duty tool, engineered to quickly and efficiently train and fasten in the vineyard, nursery or orchard. TYING TAPE and STAPLES are also required for this tool.
TECHNICAL SPECS
- Length - 21.5cm
- Cutting Length - 45mm
- Cutting Diameter - 32mm
- Weight - 345g
- Wider opening than any other tool on the market
- Adjustable opening (it can be adjusted from 0 from 80mm wide
- The large arch on the jaw gives the tool a larger tying diameter than its competitors
- Holds more staples than other tape tools, therefore there is less time wasted with loading and re-loading
- Smooth easy action requiring less effort
- Blades are longer than other brands giving a better cutting capacity and longer life
- Limited 12 month manufacturers warranty
SIMES TYING TAPE and STAPLES are also required for this tool (sold separately)
REPLACEMENT PARTS

There are full replacement parts available. CLICK HERE to view the parts guide.

SILKY SAW TECHNOLOGY...

	Mirai-Me Smooth Cutting The teeth of the future! Silky blades have precision ground razor sharp teeth, with 4 cutting angles along their length. They leave an especially smooth surface after cutting and are ideal for pruning, greatly reducing the risk of infection. They can rip-cut, cross-cut and slant-cut.
	Non-Set Teeth The blades are made from SK-4 high carbon steel and are taper ground (i.e. thicker at the tooth edge and thinner at the back of the blade). This taper reduces resistance giving smoother, easier, and faster cutting performance.
	Impluse Hardening Using a special high frequency heating technique, teeth are heated instantly and hardened. Because only the teeth are heated, the blade retains its normal flexibility. Hardened teeth stay sharp about 3 times longer than non-hardened teeth.
	Four Rows of Teeth Silky Saw teeth are set in such a way that there appears to be 4 rows of them. These are rough cutting hand saws for heavier tasks. They can rip-cut, cross-cut and slant-cut.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Sharpenable Because impulse-hardening is not applied, the blades marked with this symbol can be sharpened with a file.
	Hard Chrome Plating Hard Chrome Plating produces an exceedingly hard and durable surface. The blades are resistant to rust and the effects of resin, and they are finely or mirror polished and wipe clean easily.
	Rubber Handles Almost all Silky Saws have rubber compound elastomer handles, either inserted or vulcanised to ABS plastic or steel. Rubber handles are more comfortable to hold, reduce vibration, and offer superior grip in the cold and wet.

SILKY TEETH CONFIGURATIONS...

	Extra Large Teeth Typically, this saw will be for use in forestry or heavy-duty arborist work. The teeth configuration will range between 3 and 7 teeth per 30mm and will give a very aggressive cut. In general you will be surprised by the smoothness of the cut.
	Large Teeth A saw with large teeth will be ideal for use in heavy/medium pruning tasks, root cutting, and construction. The number of teeth will range between 7 and 8 teeth per 30mm. An aggressive and smooth cut will be achieved.
	Medium Teeth Ideal for pruning work or construction, a medium teeth configuration usually has 10 teeth per 30mm and will give a cleaner finish when compared to larger teeth saws.
	Fine Teeth These saws are likely to be used for gardening and woodworking, and a fine teeth configuration typically comprises of 13 to 20 teeth per 30mm and will achieve a clean finish.
	Extra Fine Teeth These saws will have very fine teeth ideal for woodworking and carpentry, and range between 20 and 32 teeth per 30mm, and a very smooth finish can be expected.